The product can be applied by: Brush or spray.
Spreading Capacity per coat: Depends on film thickness applied, type of texture, surface porosity, imperfections, temperature & wastage during painting 12 - 15m2/l per coat on a primed surface.
Maximum spread rate per coat is obtained at minimum dry film thickness and vice versa.
New Ferrous and Steel Surfaces: Degrease with Crown White Spirit or an appropriate degreaser, followed by a fresh water rinse. Remove all rust using a wire brush to ST2 of the Swedish Standard SIS 055900 - 1967. Apply 1 coat of Prefab Red Oxide for mild conditions or 1 coat of Zinc Phosphate Primer for harsh environments. Finish with 1–2 coats of Crown Aluminium Paint, diluted with White Spirit as per the recommended application method.
New Galvanised Iron: Degrease with Crown White Spirit or a suitable degreaser, followed by a fresh water rinse. Test the surface for “water break free” before priming. Apply 1 coat of 1-pack Etch Primer or a mordant solution. Then, use 1 coat of Prefab Red Oxide in mild conditions or 1 coat of Zinc Phosphate Primer in harsh environments. Finish with 1–2 coats of Crown Aluminium Paint, diluted with White Spirit according to the application method.
Woodwork: Ensure the wood is completely dry. Punch all nail heads below the surface, sand down to a smooth finish, and dust off. Treat all knots and pitch streaks with 2 thin coats of Knotting. Apply 1 coat of Crown White Wood Primer, followed by 1–2 coats of Crown Aluminium Paint, diluted with White Spirit as per the recommended application method.
Masonry: Remove all loose particles and ensure the surface is completely dry. Apply 1 coat of Plus 3 Masonry or Alkali Resisting Primer, followed by 1–2 coats of Crown Aluminium Paint, diluted with White Spirit as per the application method.
Tanzania
Uganda
Rwanda
