Crown Chlorinated Rubber Zinc Phosphate Primer

The product can be applied by: Brush, roller or spray Spreading Capacity per coat: Depends on film thickness applied, type of texture, surface porosity, imperfections, temperature & wastage during painting 7 - 9m2/l when applied on smooth surfaces. Maximum spread rate per coat is obtained at minimum dry film thickness and vice versa.

Iron and weathered Steel

·       Clean with White Spirit and rinse thoroughly with fresh water. Allow to dry.

·       Sand with P120 – 180 sandpaper

·       1 coat Crown Chlorinated Rubber Zinc Phosphate Primer diluted up to 10% by volume with Chlorinated Rubber Thinner

·       1–2 coats Crown Chlorinated Rubber Paint

Galvanised Iron and Aluminium

·       Clean with White Spirit and rinse thoroughly with fresh water. Allow to dry.

·       Sand with P120 – 180 sandpaper. Apply 1 coat Crown One Pack Etch Primer undiluted and overcoat within 1 month

·       1 coat Crown Chlorinated Rubber Zinc Phosphate Primer diluted up to 10% by volume with Chlorinated Rubber Thinner

·       1–2 coats Crown Chlorinated Rubber Paint

Previously painted surfaces

·       Remove loose/ flaking paint down to firm base. Sand with P120 – 180 sandpaper to provide key and dust off

·       Patch prime bare areas with Crown Chlorinated Rubber Zinc Phosphate Primer diluted up to 10% by volume with Chlorinated Rubber Thinner

·       1–2 coats Crown Chlorinated Rubber Pain

·       Rapid drying.

·       Lead free.

·       Excellent adhesion and rust inhibition.

·       Superior chemical resistance.