Crown Duotone

The product can be applied by: Single-jet spray equipment only by experienced applicators at strictly controlled pressure

Mixing Procedure 1. Measure 3 parts by volume base and into a clean container. Measure 1 part by volume Water phase separately 2. Add the water phase to the base and stir till homogeneous. 3. Measure the coloured gloss paint as per formulation and add to the mixture in 2 while stirring 4. Apply using a special spray gun at recommended pressure

Spreading Capacity per coat: Depends on film thickness applied, colours in use, type of texture, surface porosity, imperfections, temperature & wastage during painting. Duo-Tone is applied “wet on wet” creating a several coats, high build finish, with very low spreading capacity of about 4m2/l per coat.

Maximum spread rate per coat is obtained at minimum dry film thickness and vice versa.

·       Attractive appearance.

·       Flexible, abrasion resistant finish.

·       Good heat and chemical resistance.

·       Impermeable to moisture.

·       Easily cleaned and can be scrubbed repeatedly without damage.

·       Alkali-resistant, suitable for use on new (dry) plastered surfaces.