· Thinner Thinner for road marking paint Touch dry < 10 minutes. Open time for traffic 30 minutes. Storage Shelf life 12 months.
· Surface preparation Clean road surface from dust, grease and any other foreign matter. Do not paint on a wet or damp surface, or when rain is expected.
· The required amount according to standard 934 is ½ liter per square meter. Over rough aggregate (larger than 2 mm, or when small holes must be filled, use higher amounts of paint, up to ¾ liter per one square meter).
· Use such higher amounts of paint for application on seams or patches. Do not leave the paint can open, to avoid crust build-up.
· Paint application Application method Pressure Nozzle Orifice Thinning Ratio % (atm.) Brush/roller 0-5% Airless Spray 4-5 0.018 -0.021” 0-5%
· Application remarks Stir well before and during application.
· Precautions: Continuous brushing on one spot may melt the road asphalt and cause color changes in the paint (bleeding). Paint visibility at night can be enhanced by scattering glass beads designed for this purpose on the paint coat immediately after paint application, while the paint is still wet, in quantities of 100-150 grams per square meter. Do not apply when temperature is below 5ºC or above 40ºC. Never mix this material with others when not specifically recommended by us.
· Availability: From Crown Depots in Nairobi, Kisumu, Mombasa, Meru, Nyeri, Eldoret, Arusha, Mwanza, Dar es Salaam, Kigali and through Crown Stockists. Storage Conditions: Store under cool dry conditions away from direct sunlight, heat and extreme cold.