Crown Covermatt + 2 Emulsion

New Plaster

Remove loose particles. Skim with Crown Walplast Cement Putty.
Apply Crown Covermatt+2 or Interior/Exterior Emulsion Undercoat diluted up to 15% by volume with water.
Apply 1–2 coats Crown Covermatt+2 diluted up to 10% by volume with water.

Emulsion painted surface in sound condition
Sand and clean. Fill cracks with an appropriate filler.
No primer required.
Apply 1–2 coats Crown Covermatt+2 diluted up to 10% by volume with water.

Oil based enamel painted surface in sound condition
Sand down and clean. Fill cracks with an appropriate filler.
Apply 1–2 coats Universal Undercoat diluted up to 10% by volume with White Spirit.
Apply 1–2 coats Crown Covermatt+2 diluted up to 10% by volume with water.

Loosely bound & lime-washed, cement painted, gypsum filler coated surfaces or chalky wall
Remove chalking down to a firm base. Fill cracks with an appropriate filler.
Apply 1–2 coats Crown Penetrating Primer undiluted, or 1–2 coats Interior/Exterior Emulsion Undercoat diluted up to 15% by volume with water.
Apply 1–2 coats Crown Covermatt+2 diluted up to 10% by volume with water.

Wood Sand along the grain.

Apply Crown White or Aluminium Wood Primer, followed by Universal Undercoat diluted up to 10% by volume with White Spirit.
Apply 1–2 coats Crown Covermatt+2 diluted up to 10% by volume with water.

Boards Sand.

Apply 1–2 coats Acrylic Primer Sealer Undercoat diluted up to 15% by volume with water.
Apply 1–2 coats Vinyl Matt Extreme diluted up to 10% by volume with water.

• Cost effective.

• Excellent whiteness, opacity and spread rate.

• Hides minor surface imperfections. Ideal for ceilings. Allows plaster surfaces to breathe.