Crown Wallplast Skim coat

·       Thinner & equipment cleaner: Water

·       Mixing: Mix 2 parts powder and 1-part water by volume. Add water to the powder with mixing  until the desired consistency is achieved. Leave to mature for 10 minutes. Remix again for 2  minutes. Product has a short pot-life of 1 hour at 25^oC. Mix only enough quantity to be used  within the pot-life.  

·       Drying Times:  Surface dry: 1 hour. Setting time:  2 hours. Dry to sand: 4 hours.

·       The product can be applied by: Steel trowel or spatula  

·       Spreading Capacity per coat:  Depends on film thickness applied, type of texture, surface porosity, imperfections, temperature & wastage during painting.   

·       18 - 20m² per pack @1 – 1.5mm thickness.

·       Excellent workability.

·       Ease of use at site.

·       Interior and Exterior Use.

·       Breathable – can be used even if walls still have some moisture.

·       Cement based hence better compatibility and good adhesion with cement plaster base.

·       Non-flammable.