Crown Jewel Silk

The product can be applied by: Brush, roller or spray.  

Film Thickness per coat: DFT: 35 - 45 μm 

New Plaster: Remove loose particles and skim using Crown Walplast Cement Putty. Apply 1–2 coats of Interior/Exterior Emulsion Undercoat or Crown Jewel Silk diluted up to 15% by volume with water. Finish with 1–2 coats of Crown Jewel Silk diluted up to 10% by volume with water. 

Emulsion Painted Surface in Sound Condition: Sand and clean the surface thoroughly and fill dents with an appropriate filler. No undercoat is required. Apply 1–2 coats of Crown Jewel Silk diluted up to 10% by volume with water. 

Oil-Based Enamel Painted Surface in Sound Condition: Sand down and clean the surface, then fill dents with an appropriate filler. Apply 1–2 coats of Universal Undercoat diluted up to 10% by volume with White Spirit. Finish with 1–2 coats of Crown Jewel Silk diluted up to 10% by volume with water. 

Loosely Bound & Lime-Washed, Cement Painted, Gypsum Filler Skimmed Surfaces: Remove all flaking paint down to a firm base or original building surface and fill dents with an appropriate filler. Apply 1–2 coats of Crown Penetrating Primer undiluted or 1–2 coats of Interior/Exterior Emulsion Undercoat diluted up to 15% by volume with water. Finish with 1–2 coats of Crown Jewel Silk diluted up to 10% by volume with water. 

Wood: Sand along the grain. Apply Crown White or Aluminium Wood Primer followed by Universal Undercoat diluted up to 10% by volume with White Spirit. Finish with 1–2 coats of Crown Jewel Silk diluted up to 10% by volume with water. 

Boards: Sand the surface thoroughly. Apply 1 coat of Acrylic Primer Sealer Undercoat diluted up to 15% by volume with water. Finish with 1–2 coats of Crown Jewel Silk diluted up to 10% by volume with water.