· Thinner & equipment cleaner: White Spirit
· Dilution Ratio: Supplied ready for use. For application to very dark areas, thin up to 20% by volume Crown White Spirit to prevent formation of a hazy/ whitish finish. Avoid over-thinning. Stir well before use.
· Apply generously, working from the top of a vertical wall going down. Flood the surface to cause a “run down” of about one-foot (300mm). Immediately apply another one-foot band below this band until all the area is covered. If spray applied, use the minimum pressure to prevent atomization. Highly porous surfaces may require a second coat. Small articles like bricks and blocks may be dipped. A mask should be worn as concentrations of the solvents on prolonged use may cause temporary dizziness or sickness if inhaled.
· Drying Times: Surface dry 1 hour. Re-coatable after 16 hours.
· The product can be applied by: Brush or spray. Small articles like bricks can also be dipped.
· Spreading Capacity per coat: Depends on film thickness applied, type of texture, surface porosity, imperfections, temperature & wastage during painting 2 - 5 m2/l per coat Maximum spread rate per coat is obtained at minimum dry film thickness and vice versa.
