Premium quality emulsion based on the German Silicone Technology preferred by leading architects worldwide.
Please Choose Capacity.
Additional
Information
It is suitable for new, previously painted plaster, cement, brick, stone and many other surfaces including soft-board and hardboard ceilings and walls, asbestos sheets.
Thinner & equipment cleaner: Water
Dilution Ratio: Maximum 15% by volume with water. Avoid over-thinning as this will affect the opacity. Stir well before use.
Drying Times: Surface dry 1 hour max & Hard dry after 4 hours max
The product can be applied by: Brush, roller or airless spray
Spreading Capacity per coat: Depends on film thickness applied, type of texture, surface porosity, imperfections, temperature & wastage during painting 12 – 14 m²/l.
Spread rate can be reduced to as low as 2m2/L on roughcast plaster Maximum spread rate per coat is obtained at minimum dry film thickness and vice versa.
Visible water repellency effect.
Fully breathable.
Dirt repellent.
Excellent opacity.
Easy to apply-no special application or equipment needed.
Rapid drying i.e. one can apply two coats the same day.
Can be applied on all types of surfaces subject to normal preparation.
Waterborne system, odour free.
Wide colour range.
Long term protection – life expectancy of 15 years.
Reduced maintenance costs.
Tested and qualifies the efficacy at well-known international laboratories.
Suitable for almost all architectural structures like exterior masonry.
Tanzania
Uganda
Rwanda
