Crown Ultraguard Silicone Extreme

·       Thinner & equipment cleaner: Water

·       Dilution Ratio: Maximum 15% by volume with water. Avoid over-thinning as this will affect the opacity. Stir well before use.

·       Drying Times: Surface dry 1 hour max & Hard dry after 4 hours max

·       The product can be applied by: Brush, roller or airless spray

·       Spreading Capacity per coat: Depends on film thickness applied, type of texture, surface porosity, imperfections, temperature & wastage during painting 12 – 14 m²/l.

·       Spread rate can be reduced to as low as 2m2/L on roughcast plaster Maximum spread rate per coat is obtained at minimum dry film thickness and vice versa.

·       Visible water repellency effect.

·       Fully breathable.

·       Dirt repellent.

·       Excellent opacity.

·       Easy to apply-no special application or equipment needed.

·       Rapid drying i.e. one can apply two coats the same day.

·       Can be applied on all types of surfaces subject to normal preparation.

·       Waterborne system, odour free.

·       Wide colour range.

·       Long term protection – life expectancy of 15 years.

·       Reduced maintenance costs.

·       Tested and qualifies the efficacy at well-known international laboratories.

·       Suitable for almost all architectural structures like exterior masonry.

·       Crack bridging for hairline cracks up to 1mm.