Crown 2K Acrylic Enamel

• Thinner & equipment cleaner: 2K Acrylic Thinner
• The product can be applied by: Spray. Brush may also be used for lower quality jobs
• Mixing Ratio: 4 parts Base: 1 part Hardener: 1 part Thinner (by volume)
• Mixing: This product is highly susceptible to moisture and should be mixed/stored in dry, non-humid conditions. After mixing base, hardener and thinner in the correct ratio, allow to stand for 5-7 minutes for bubbles/effervescence to subside, before use.
• Hardener contains isocyanate - ensure adequate ventilation and good booth extraction when spraying and put on respirator
• Application Viscosity: 20 -22 seconds B4 Cup @25oC
• Application Pressure: 45 -50 PSI
• Spreading Capacity per coat: Depends on film thickness applied, primer porosity, imperfections, temperature & wastage during painting. 8 – 10 m²/l per coat. Maximum spread rate per coat is obtained at minimum dry film thickness and vice versa.
• Drying time (Touch Dry / Hard Dry / Overcoating/Repair Time / Potlife) vary depending on surface temperature:
• 15 – 25oC: 1 hour / 6 hours / 6 hours / 8 hours
• 26 – 30oC: ¾ hour / 4-5 hours / 5 hours / 6 hours
• 31 – 35oC: ½ hour / 3 hours / 4 hours / 4 hours
• For increased productivity, can be baked/stoved at 60 – 70oC for 45 minutes after a 10 minute flash off

Durable. Excellent UV protection and colour retention. Excellent resistance petrol, mild chemicals, mechanical abrasion and harsh weather conditions.