Water based, 3 in 1 (primer/ sealer/ undercoat) for timber and (untreated) hardboard.
Please Choose Capacity.
Additional
Information
Sealing and undercoating new timber and boards prior to application of oil or water-based topcoats.
Application methods:
By brush, roller, airless spray or conventional spray.
Recommended film thickness per coat Wet film thickness: 70 - 100 microns (μm) Dry film thickness: 30 - 40 microns (μm) Film thickness will vary and is calculated as average.
Spread rate per coat: 8 – 10 m²/l per coat Spread rate depends on film thickness applied, type of texture, surface porosity, imperfections, temperature, wastage during painting etc. Thinner:
Water Thinning ratio: Maximum 15% by volume with water.
Avoid over-thinning as this will affect the opacity.
Stir well before use and intermittently during use.
Water thinned. Rapid drying. Low VOC. Low odor. Can be overcoated with both oil and water-based finishes.
Tanzania
Uganda
Rwanda
