Crown Granite Finish Paint

• Thinner & Equipment Cleaner: Water
  STEP 1 Surface Preparation – Inspect the surface for dampness, effloresces, loose particles
  STEP 2 Remove all loosely held particles / old paint by scraper, wire
  STEP 3 If Cracks observed on surface Fill all the cracks as below
  Cracks up to 1.5 mm – Fill with Polyfilla
  Cracks above 2mm – Fill concrete + Dr. Fixit
  STEP 4 Hairline Cracks / Undulation/Unevenness – Fill by 1 coat of Crown Level Putty (Coarse) 2 to 4mm + 1 coat Crown Walplast Cement Putty (Fine) 1.5 to 2mm. (If surface is free of undulations & loose particle, skip step 2 & proceed with step 5)
  STEP 5 Apply 2 coats of Granite Undercoat by spray, Brush or Roller
  STEP 6 Apply good quality Crown Masking Tapes to make panelling effect on walls, if desired. Or apply finish like normal smooth finish paint
  STEP 7 Apply Granite Texture Finish Mix (Mixture of Granite Bonding Coat & Granite Flake in ratio GBC -1.25 L: GF - 1 KG)
  STEP 8 Flat the sprayed Crown Granite Texture Mix by plastic/ acrylic trowel
  STEP 9 If done panelling effect, then remove the Crown Masking tapes carefully
  STEP 10 Apply 2 coats of Granite Topcoats
  STEP 11 Allow it to dry for 12 hours
  STEP 12 Granite Texture Finish is Ready

Dust proof with self-cleaning properties. High Abrasion and scratch resistance. 10-year warranty. Super weatherproof against rainwater and sun. Resistant to spread of flame. Good colour retention.