Crown Rockfast

Thinner & equipment cleaner: Water

Dilution Ratio: Rockfast is supplied ready for use and UNDER NO CIRCUMSTANCES SHOULD THE PRODUCT BE THINNED. Stir well before use

Drying Times: Surface dry: 2-4 hours. Hard dry: 24 hours in normal dry conditions. Attains maximum toughness after several days.

Rockfast should be applied with a large (short bristled) brush and spread evenly over an area not exceeding one square metre. Once the area has been coated the surface should be laid off horizontally with the brush and immediately textured (within 5–10 minutes of initial application) with a special Rockfast roller. Texturing should be performed horizontally/vertically with minimal pressure. Over rolling should be avoided.

·       Provides maximum long-term durability in the most severe tropical and coastal climates.

·       Disguises wall surface imperfections and patchiness (variation in substrate texture and porosity) often found on cement rendered walls that cannot be disguised by normal decorative paints.

·       One coat finish.