Type: A single pack, low build, Chlorinated Rubber based coating.
Please Choose Capacity.
Additional
Information
A hardwearing, chemical resistant finish for use in laboratories, chemical factories, breweries, dairies, food factories and bottling plants, hospitals, clinics etc. Widely used on steelwork in chemical plants and marine environments.
Substrates:Can be applied to suitably prepared metal, timber, plaster and concrete swimming pools.
The product can be applied by: Brush, roller or airless spray. Brush application is preferred. Roller and Spray also suitable but require to be thinned.
Spraying requires to be thinned sufficiently to prevent “cobwebbing”.
Thinner coats give thin films which result in less protection
Spreading Capacity per coat: Depends on film thickness applied, type of texture, surface porosity, imperfections, temperature & wastage during painting
6 - 11 m²/l per coat
Maximum spread rate per coat is obtained at minimum dry film thickness and vice versa.
Thinner: Chlorinated Rubber Thinner
Ready for use by brush. Thin up to 10% for Roller. Thin up to 40% for Spraying. Stir well before use.
Tanzania
Uganda
Rwanda
